Add-On License: LR2 / Freelander 2 2007-2014

Add the LR2 / Freelander 2 to the Nanocom you already own

The Nanocom license belongs to the tool, not to a VIN. When you add a vehicle to the driveway, you don't buy a second Nanocom — you buy the unlock for that vehicle and enter it into the unit you already have. Your existing vehicles keep working. The new one appears in the menu.

Extinct Motorsports is the Official US Reseller and US Service Center for Blackbox Solutions: you order here, and your code is checked, applied and supported from Virginia.

On an LR2 that opens every module the truck reports on its CAN bus network — engine, transmission, parking brake, ABS and body systems — plus key programming, and configuration changes and ECU updates through Genesis.

What this truck needs

This vehicle uses one code: the LR2 unlock. It covers the whole vehicle, so you need it whatever else your Nanocom already holds. The only choice is the cable: the LR2 talks through the black CAN BUS cable, which every kit except the P38 and Discovery I kits ships with.

• Your unit started as any other kit, or you already have the black cable? You're buying the LR2 unlock only. Choose My Nanocom started as any kit except a Discovery I or P38 kit or already has the black cable.
• Started as a Discovery I or P38 kit? It came with the green cable. You're buying the LR2 unlock and the black cable. Choose My Nanocom started as a Discovery I or P38 kit (includes the black cable).

Added codes or the other cable since you bought it? Go by what your unit has now.

If you chose the wrong option: we see what your unit already holds. If you owe more, we contact you before issuing; if you paid too much, we refund the difference.

▴ Back to top

Finding your Nanocom ID

The Nanocom Unit ID box needs your unit's six-character ID. To find it:

1. Power up the unit — plugged into a truck, on the 12V supply, or over USB.
2. Go to NANOCOM → SETUP → NANOCOM ID.
3. Write down the six characters exactly as shown. They're case sensitive: A1b2C3 is not the same as A1B2C3.

Buying a kit in the same order? Enter NEW and we apply the code to your new unit.

▴ Back to top

How the code reaches you

1. We review your order, check your unit at Blackbox, and order the code against your unit ID — usually the next business day.
2. We apply the code to your unit and email it to you. The email gives the box number it goes in, and the code also appears in your Blackbox account. If your selection includes a cable, it ships from Virginia and shipping is charged at checkout.
3. On the unit: NANOCOM → SETUP → UNLOCK CODE. Clear each box, type the code exactly as issued, switching the keypad between upper and lower case as needed.
4. Scroll to the last page, press Save Unlock Code, then power the unit off and back on. Your new vehicle is in the menu.

If a vehicle reports "Function Locked" afterward, a code went into the wrong box — each code is numbered and has its own slot. Email us and we'll sort it out.

▴ Back to top

Do I need a cable as well?

Only if your Nanocom has just the green OBDII cable. The LR2 talks through the black CAN BUS cable, which every kit except the P38 and Discovery I kits ships with. If yours has only the green cable, choose the option that includes the black cable: it ships with your order, so you don't need to add the cable separately.

▴ Back to top

Before you order

• The license arrives by email at the address on your order. Checkout asks for a shipping address on every order. If your selection has no cable, nothing ships and checkout shows License by email: no shipping, at no charge.
• Non-refundable once issued. A code is generated for one specific Nanocom and can't be reissued, reassigned or reused. That's Blackbox's policy and it applies wherever you buy. Check your engine management and your Nanocom ID before ordering, and ask us if there's any doubt.
• Nanocom Evolution only. If you have a Nanocom LITE, the upgrade path is a different product — email us.
• Buying a used Nanocom? Find out which licenses it already carries before you pay for more.

Manuals and ECU guides for every vehicle are in our Nanocom Documentation Library.

Don't own a Nanocom yet? Start with a full kit for your truck — LR3, LR4, LR2, Evoque, Range Rover Sport or 2010–2012 L322, whichever you have — and then add more capability if needed.

▴ Back to top