Add-On License: Defender 1998-2006 TD5

Add the Defender Td5 to the Nanocom you already own

The Nanocom license belongs to the tool, not to a VIN. When you add a vehicle to the driveway, you don't buy a second Nanocom — you buy the unlock for that vehicle and enter it into the unit you already have. Your existing vehicles keep working. The new one appears in the menu.

On a 1998–2006 Defender Td5 that opens the Td5 engine with its map tools and, where fitted, the 10AS alarm and immobilizer and Wabco ABS/traction control.

What this truck needs

This vehicle uses two codes: the Defender Systems unlock and the Td5 engine unlock. Choose the option that matches what your Nanocom already holds and you are charged only for the code you are missing.

• Your unit started as a Discovery II Td5 kit? It already has the Td5 engine unlock. You're buying the Defender Systems unlock only.
• Started as a Defender Puma kit or a Defender NAS V8 kit? It already has the Defender Systems unlock. You're buying the Td5 engine unlock only.
• Anything else — a Discovery II V8, a P38, a Discovery I, an LR3 or later: you need both.

Added codes to your unit since you bought it? Go by what it holds now, not the kit it started as.

If you chose the wrong option: we see what your unit already holds. If you owe more, we contact you before issuing; if you paid too much, we refund the difference.

▴ Back to top

Finding your Nanocom ID

The Nanocom Unit ID box needs your unit's six-character ID. To find it:

1. Power up the unit — plugged into a truck, on the 12V supply, or over USB.
2. Go to NANOCOM → SETUP → NANOCOM ID.
3. Write down the six characters exactly as shown. They're case sensitive: A1b2C3 is not the same as A1B2C3.

Buying a kit in the same order? Enter NEW and we apply the code to your new unit.

▴ Back to top

How the code reaches you

1. We review your order, check your unit at Blackbox, and order the code against your unit ID — usually the next business day.
2. We apply the unlock to your unit. It appears in your Blackbox account, and we email you the code as well, with the box number it goes in. Nothing ships.
3. On the unit: NANOCOM → SETUP → UNLOCK CODE. Clear each box, type the code exactly as issued, switching the keypad between upper and lower case as needed.
4. Scroll to the last page, press Save Unlock Code, then power the unit off and back on. Your new vehicle is in the menu.

If a vehicle reports "Function Locked" afterward, a code went into the wrong box — each code is numbered and has its own slot. Email us and we'll sort it out.

▴ Back to top

Do I need a cable as well?

No. A Defender Td5 talks through either cable — the black CAN BUS cable or the green OBDII cable — so whichever one came with your Nanocom works.

▴ Back to top

Before you order

• Nothing ships. Licenses are digital and arrive by email at the address on your order.
• Non-refundable once issued. A code is generated for one specific Nanocom and can't be reissued, reassigned or reused. That's Blackbox's policy and it applies wherever you buy. Check your engine management and your Nanocom ID before ordering, and ask us if there's any doubt.
• Nanocom Evolution only. If you have a Nanocom LITE, the upgrade path is a different product — email us.
• Buying a used Nanocom? Find out which licenses it already carries before you pay for more.

Manuals and ECU guides for every vehicle are in our Nanocom Documentation Library.

Don't own a Nanocom yet? Start with a full Defender kit — NAS/50th V8, Td5 or Puma, whichever you have — and then add more capability if needed.

▴ Back to top